ODM Centrifugal Casting Supplier – ODM Aluminum bicycle frame & wheel Hub – Fangchen

Please see our bicycle frame parts products they are all customized parts we make the dies and make products for customers .

FANGCHEN has a professional and senior mold engineering team, providing optimal mold solution to customers based on their requirements in order to guarantee the products quality and mold life. We make the dies with MEGAMA Flow system . And after the simulation result get without any problem we go for die design . For this kind products will need at least 3 sliders , during producing need to take care of the situation of sliders .

Bicycle frame parts usually g need to use our 800-1200T machine to produce.We can mass produce the parts with thin wall thickness as 1.0mm.We have accumulated rich experience on internal porosity and air tightness control in thick-wall die casting parts.

We use common materials are ADC12, A380 and A360. Other materials also can be customized based on client’s requirements . We have stable Material supplier in Shanghai and Jiangsu Province . Every time material get into our factory we will make the inspection of the material elements and leave record for future trail .

Our step to make the parts for customer as follow:
1-Get confirmation of the the customized Drawing
2-Start the design of the die
3-Make the die meanwhile analyze on the surface treatment
4-After Die ready make trail
5-Get the samples and make CMM inspection by following the Customized Drawing
6-After CMM report given “green light” , send samples to customer end for checking
7-After customer confirm the final parts , we will make the trail production like 100-1000 for first order
8-After customer confirm the trail production , we will follow customers order for future produce

Fangchen workers follow the steps strictly , every step can be trail if any problem on the products were find we can find out the problem and solve the problem in short time .

FAQ :

1. Are you a manufacturer or a trading company?

We are a professional manufacturer with more than 10 years of experience in designing and producing multi-die castings for export.

2. How can I get some samples?
If you need it, we are happy to provide you with free samples, but new customers need to pay for express delivery costs, which will be deducted from the payment of the formal order.

3. Can you make castings according to our drawings?
Yes, we can cast according to your drawings, 2D drawings or 3D cad models. If a 3D cad model can be provided, the mold development efficiency will be higher. But without 3D, based on 2D drawing, we can still get the samples properly approved.

4. Can you make castings based on our samples?
Yes, we can make measurements based on your samples to make mold making drawings.

5. What is your internal quality control equipment?
We have in-house spectrometers to monitor chemical properties, tensile testing machines to control mechanical properties, and UT Sonic as an NDT inspection method to control the inspection of castings under the surface of the castings.